Film photography · Medium Format · Photography

First time with Fomapan Retropan 320

A while back – last year I think, although it could have been 2020 – I got in touch with the film manufacturer Fomapan. I’d had some issues with a batch of Fomapan 100 that I’d bought which was resulting in a lot of small white speckles on the scanned negatives. This wasn’t dust, but some problem with the film that was becoming apparent when it was developed. A bit of reasearch online produced a number of other reports of the same probleM, some with the same batch number as the rolls I had, so I got in touch with the company to ask if they could do anything to help.

Concrete and sky

They provided some instructions on how the issue with the problem batch might be addressed, and confirmed that there had been an issue with some rolls of the film that had been produced. Unfortunately, I didn’t have any luck after following the special instructions and the next roll still showed the same speckles, albeit slightly lessened. In addition, Fomapan also sent me a few rolls of film to recompense me for my troubles, some Fomapan 400, and also a roll of Retropan 320.

To the top

I’d never shot Retropan before so was curious as to what it might produce. Unfortunately, thanks to the pandemic and various lockdowns, the film languished in the freezer for quite some time, awaiting its day in the sun. That day came a few weeks ago when I took a trip to Leeds for the day with my wife and her sister. They hit the shops while I went off to make photos (and also visit the Royal Armouries museum). I burdened myself with choice on the day, having three film cameras, plus my little Ricoh digital compact. The film cameras included the Yashicamat 124g (with the Retropan), my Olympus XA3 (with some HP5+), and the newly acquired RETO Ultrawide & Slim (with some Agfa Vista Plus 200 – some of the shots which have already been seen here on the blog recently).

Belgrave Music Hall and Canteen

I wasn’t massively enthused about shooting the Retropan, even though trying a new film usually means at least some excitement is to be had. Most of the photos I’d seen online from other people had a bit of a flat look about them, which isn’t something I tend to favour. I also looked into what speed to shoot the film at, having had issues with underexposure when shooting other Foma films at box speed in the past. The general concensus was to overexpose it by at least a stop, with one person suggesting that 80asa was the sweet spot. In the end I opted to shoot it at 125asa and develop it normally.

City centre graveyard trees

The experience of shooting the film went without hitch, and developing was likewise straightforward. The film felt quite thin, but went onto the spiral without any problem. As with other Foma films, I pre-washed it before developing and got the usual witches brew of green liquid when I poured the rinsing water away.

Iron bridge

The photos are actually quite nice. Not the look I tend to go for, but there’s something there in the tonality that I find quite pleasing. There’s lots of grain present, but also good detail, and using my usual post-processing settings as a starting point soon got the scans where I was happy with them.

Street art, or river art?

So, would I buy a roll with my own money and shoot it again? Honestly, probably not. I’d go for one of the other Foma line instead. But I wouldn’t turn down a roll that came my way for free. 🙂

River Aire

Yashicamat 124G & Fomapan Retropan 320. Ilfotec DD-X 1+4 10mins 20° .

Taken on 26 February 2022

Film photography · Medium Format · Photography

Beside an oxbow lake

Down at the bottom end of Woodhouse Washlands there is an oxbow lake. It’s actually not much of a “bow”, more a strip of water which lies maybe fift to a hundred or so metres from the current course of the River Rother.

A tree stands at the edge of the water – a willow, I think – and is the subject of today’s photograph. The fog masks so much in this scene which, in clear conditions, would reveal houses and other structures on the valley side in the distance beyond the tree. Thank you fog.

By the oxbow

Yashicamat 124G & Ilford HP5+ (pushed to 1600asa). Ilfotec DD-X 1+4 13mins @ 20°

Taken on 15 January 2021

Film photography · Medium Format · Photography

A pylon in the fog

It’s been a while since I posted a power-lines picture I think, so let me rectify that. If you’ve read this blog for a while you’ll perhaps realise that I find pylons and power lines an appealing choice of subject matter. Not to the extent that I go looking for them purposefully, but they often draw my eye. This pylon, stood like some metallic sentinel on the foggy and frosty Woodhouse Washlands certainly caught my attention.

I took myself off for a trip to the seaside today. I don’t often tend to go there on cold January days, but I figured that a change of scene would get my creative juices flowing (plus I could eat some fish and chips while looking out at the sea…). The day was sunny and bright, but bittely cold with chill winds – the remnants of storm Malik that was now headed east out to sea – so a hat, gloves and a fully zipped up jacket were a definite necessity. I’m feeling tired now, and ready to hit the shower when I finish typing this, but my belly is full of my fish and chip dinner, and I have two rolls of 35mm film to be developed, so the day counts as a success. The pictures will turn up here in a bit, although I’ve got two other rolls of stuff to root through before that happens. It’s nice to be back in the black again, photographically speaking.

Back to the usual routine of work tomorrow.

Analog sentinels

Yashicamat 124G & Ilford HP5+ (pushed to 1600asa). Ilfotec DD-X 1+4 13mins @ 20°

Taken on 15 January 2021

Film photography · Medium Format · Photography

Padlocked gate

I usually tend to write these blog posts later in the day, after I finish work and have eaten, but I’m writing this one earlier. It’s Sunday, so I’m not at work, but I am going out to eat lunch with my wife shortly, so don’t have unlimited time. And I can’t think of what to write.

It’s something that I often fret about when composing these blog posts, probably as a factor of putting them out every day. What to put into words without it feeling like it’s for the sake of it. I doubt my success rate is high.

I could go down the route of describing how the picture was made, giving background on the events that led to its capture along with the equipment and techniques I used. Or I could describe the picture itself, breaking it down as I see it. Or I could talk about something completely unrelated and drop the picture in either to illustrate a point or, more likely, just to publish a picture. Sometimes it’s just a sentence to get it over and done with.

It’s not so much writer’s block on days such as today, more a lack of direction and no particular topic inspiring me to words. It feels frustrating and that the blog post serves no purpose on these occasions – either to anyone reading, or to me as the author.

Don’t forget to come back for more random blathering tomorrow! 😀

Padlocked

Yashicamat 124G & Ilford HP5+ (pushed to 1600asa). Ilfotec DD-X 1+4 13mins @ 20°

Taken on 15 January 2021

Film photography · Medium Format · Photography

Beneath the viaduct

I’ve spent this afternoon developing a roll of Ilford FP4+ that I shot last weekend, and also scanning a roll of Fujichrome Provia 100 that I also shot suring the same session (but which I had developed by my local lab as I don’t have the gear for developing E6). I’m pretty happy with the Provia scans, and they’ll start to appear on here after the weekend. The FP4+ negatives look nice too, although I can never truly tell until the scan appears before my eyes.

Today’s photo is another from the foggy morning’s walk a few weeks ago and was shot beneath the viaduct that featured on the blog a couple of days ago.

Beneath

Yashicamat 124G & Ilford HP5+ (pushed to 1600asa). Ilfotec DD-X 1+4 13mins @ 20°

Taken on 15 January 2021

Film photography · Medium Format · Photography

Washlands tree on pushed HP5+

This pollarded tree has featured on the blog at least once before (and probably more times, but this is the only one that my quick search pulled up). It’s usually difficult tophotograph in isolation due to all the surrounding elements. There are other trees close by that can creep into the shot and cause background distraction, there are power lines and pylons in the area, a concrete viaduct spanning the valley, and older brick railway viaduct, plus a whole bunch of industrial units on the valley side. It’s still possible to get interesting pictures, but you generally have to work the other elements into the shot.

On foggy days though most of these things fade away. There’s sight of some of the other trees in this shot, plus the vague lines and shapes of the power lines and some factory buildings, but the fog serves to mostly obscure them.

I shot this roll of HP5+ at 1600asa and pushed it in development as the light was very dim. There is added grain in the resulting images and perhaps a little more contrast, but I think they serve to add some grit to the pictures.

Washlands tree

Yashicamat 124G & Ilford HP5+ (pushed to 1600asa). Ilfotec DD-X 1+4 13mins @ 20°

Taken on 15 January 2021

Film photography · Medium Format · Photography

Dimly seen viaduct

Two quite similar photos today, both of the A57 viaduct where it crosses the River Rother and railway lines. There was thick fog on the morning they were shot and it just disappeared into the blankness. I’m not sure which of the two I prefer though. I like the composition of the first, which is quite clean and layered, but I like the interest of the foreground grasses in the second (although they’re maybe a little messy). Anyway, both here to see, whichever you prefer.

The viaduct
The viaduct

Yashicamat 124G & Ilford HP5+ (pushed to 1600asa). Ilfotec DD-X 1+4 13mins @ 20°

Taken on 15 January 2021

Film photography · Medium Format · Photography

Inconvenience store

It’s not really inconvenient, it’s just that it was closed at the time I took this picture.

I think the place opens a little later in the morning and then stays open until late in the evening, so actually pretty convenient. It’s not a place I use often and isn’t that close to where I live, but it accepts parcel returns so it’s very useful in that regard. I didn’t set out with the intent of photographing the store – I was heading out to the washlands to get some foggy-morning pictures – but it caught my eye as I drove past and so here it is.

Convenience

Yashicamat 124G & Ilford HP5+ (pushed to 1600asa). Ilfotec DD-X 1+4 13mins @ 20°

Taken on 15 January 2021

Film photography · Medium Format · Photography

Looking up

The last of my three Yashicamat photos from Doncaster in today’s post. Of the three, I think this one is the best. It only came about when I took an idle glance upwards while walking back to the shopping centre where the car was parked. I liked the curved layers of the building.

It always pays to look up every now and then. There’s a lot to miss otherwise.

Layers

Yashicamat 124G & Ilford HP5+ (pushed to 1600asa). Ilfotec DD-X 1+4 13mins @ 20°

Taken on 8 January 2021

Film photography · Medium Format · Photography

No swimming

While wandering around doncaster in the rain, waiting for my wife and her sister to finish their shopping, I walked past the building in today’s photo. Not being a Doncaster resident I had no idea as to what it was, only that it was boarded up.

A little online research today reveals it to be the Grade II listed St James’ Street Baths. Historic England describe it as: Public Baths, Turkish and Russian baths suite, and winter concert hall, 1932. Built to designs by the Borough Estates Surveyor, Mr R E Ford. Red brick with sandstone dressings and slate roofs.

There is a lot more information about the building and it’s history on the Historic England website.

Closed

Yashicamat 124G & Ilford HP5+ (pushed to 1600asa). Ilfotec DD-X 1+4 13mins @ 20°

Taken on 8 January 2021