35mm · Film photography · Photography

A trip to Saltaire

In the early days of the new year, before I returned to work, I had a day free to do some photography. The world was my oyster (well, maybe not the world) and I was beset by the angst of choice paralysis – lots of places I might go, but a major struggle deciding on which one to choose. Quite often in these situations I just end up going to the same places I’ve been before – often into Sheffield city centre, or Kelham Island, or somewhere else close but familiar. However I was able to grasp the mettle and make a decision, and pulled Saltaire out of the, er, air.

Saltaire is somewhere I’ve never visited before. It sits to the north west of Bradford which, while not too far away, is still about an hour’s journey in the car. The village (although it’s now kinda merged into the wider Bradford conurbation), was built and named after Titus Salt to house workers employed at his mill, aptly named Salt’s Mill. The streets in the village are named after Salt’s children and other family members.

The mill and village sit beside the River Aire and the Leeds to Liverpool canal and the buildings are built in an Italianate style, which is very photogenic. As well as the mill and the houses, there are a number of other civic buildings, including a church, hospital, school, and others. The village was granted UNESCO World Heritage status in 2001.

The mill contains art galleries, shops, and a restaurant, and was a very nice place to wander around.

It’s a place I think I may revisit at some point as there is much I didn’t see, and lots to photograph.

Salt's Mill
Through Salt's Mill
Saltaire United Reformed Church
Around the side
Gatehouse
Back to t'mill
Helen St.

Yashica Mat 124G & Kodak Tri-X. Ilfotec DD-X 1+4 for 8 minutes @ 20°

Taken on 2 January 2025

Film photography · Medium Format · Photography

Regrowth

Another picture from Renishaw golf course. This old trooper of a tree is exhibiting signs that it’s not yet finished with life.

It isn’t the first time I photographed this particular tree, and an earlier shot from last October shot with my Olympus OM-10 on Ilford HP5+ can be seen below the square Yashica Mat image.

Almost a silhouette
On the old golf course

Yashica Mat 124G & Kodak Tri-X. Ilfotec DD-X 1+4 8mins @ 20°

Taken on 28 December 2024

Film photography · Medium Format · Photography

Mystery golf course tunnel

There are a number of these shallow brick lines tunnel on and around Renishaw golf course. While I don’t know for sure, I wonder if they’re there to aid drainage on the golf course in cases where the nearby river Rother breaks its bank and floods the surrounding area?

If so, they were perhaps not sufficient for the task (or at least the increasing regularity of such events) as the golf course has flooded numerous times, to the extent that it has now closed due to the constant disruption this has caused.

The news article linked above mentioned interest from a new owner for the club, but there has been little sign of this happening, and the course is now gradually returning to overgrowth. Despite this however, the club website still appears to be live, with membership offers still advertised and even a little status notification that the course is currently open!

Under Over

Yashica Mat 124G & Kodak Tri-X. Ilfotec DD-X 1+4 8mins @ 20°

Taken on 28 December 2024

Film photography · Medium Format · Photography

Along the farm track

Not far from the Trans Pennine Trail at Renishaw stands a farm. A public footpath runs along the farm track, fields to one side, and a wooded area to the other.

In the mist
Near the farm

When the track reaches the farm gate the footpath forks away across a grassy field, beneath a row of power lines, and then descends down a stony path, passing an impressive tree with an large hollow exposing its roots.

Former tree between the trees

After this point, the path is rejoined by the one I showed in yesterday’s post and they then descent to the railway line, which can be crossed by a footbridge.

Bridge and branches

Yashica Mat 124G & Kodak Tri-X. Ilfotec DD-X 1+4 8mins @ 20°

Taken on 28 December 2024

Film photography · Medium Format · Photography

A gateway to the mist

There’s a footpath beyond this gate that I haven’t walked before as I always take an alternate route that skirts some arable fields (you’ll see a couple of pictures from there soon). That mist does look tempting though. Perhaps next time I’m in the vicinity I will take the pass less well trod.

Gate

Yashica Mat 124G & Kodak Tri-X. Ilfotec DD-X 1+4 8mins @ 20°

Taken on 28 December 2024

Film photography · Medium Format · Photography

Further misty Trans Pennine Trail pictures

I’m still slowly posting these pictures I made during the misty days we got just after Christmas last year.

The two shots today are of the Trans Pennine Trail not far from Renishaw. I’ve posted pictures from this part of the TPT in the past, including this post which shows the bridge in today’s photos from a different perspective.

More picture from this misty outing to come in the next few days.

Over and under
Misty Trans Pennine Trail

Yashica Mat 124G & Kodak Tri-X. Ilfotec DD-X 1+4 8mins @ 20°

Taken on 28 December 2024

Film photography · Medium Format · Photography

Fencepost climbing frame and a new scanner

I went for a long drive (for me, at least) today. I had the opportunity to buy an Epson V850 Pro scanner for a very good price and, rather than have it shipped, I agreed with the seller to meet up and collect in person. As he lives right down on the south coast, and I’m in Yorkshire, halfway up the country, we met at a service station in Oxfordshire, which was a little over 2 hours each way for me. I took the opportunity to listen to podcasts during the journey, and the time passed quickly as a result.

The scanner is now set up and will replace the Epson V700 I’ve used for the last few years. The V700 is still in full working order but, given the recent news that Epson may be cutting manufacture of it’s film scanners, I decided to future-proof myself with a more recent model.

I’ve already scanned a roll of 120 film this afternoon to put it through it’s paces and the results are good. One thing I’m not sure about are the film holders that come with the V850. These have anti-newton inserts to hold the film flat, which is a good thing, I thought. However, what it also means is that it’s quite easy for dust to get between the film and the inserts where it can’t be removed with an air blower, resulting in marks on the scan. I guess I could be extra cautious to remove any dust each time, but this is some extra faff I’d rather avoid (I don’t really have issues with dust when scanning with other methods). Luckily, the V700 film holders can also be used with the V850, so I think I will keep hold of those and use them instead (unless I get a particularly curly strip of negatives!).

Today’s picture was scanned on the V700 a couple of months back. A fencepost gradually being colonised by ivy. You can already see the hopeful feelers reaching out for the next piece of real estate.

Ivy-clad

Yashica Mat 124G & Kodak Tri-X. Ilfotec DD-X 1+4 8mins @ 20°

Taken on 28 December 2024